Daily maintenance manual for woodworking engraving machine

Daily maintenance manual for woodworking engraving machine

The emergence of woodworking engraving machines has greatly improved efficiency. After many customers have purchased woodworking engraving machines, they seldom pay attention to the usual maintenance work. When the technicians of Superstar engraving machine manufacturers are training on site, they will teach customers precautions. And the maintenance method first, here is a brief explanation of the usual maintenance work of the woodworking engraving machine.

First of all, the brain part of the woodworking engraving machine belongs to electronic equipment. The dust in the workshop will accumulate in the main computer box, especially in summer, if the computer does not heat well, it will easily burn the circuit board, in order to keep the computer running smoothly, You also need to regularly disinfect and defragment disks.

Secondly: the lead screw, industrial control box, circuit board need to be cleaned regularly, and the work surface, including the guide rail and the material debris next to the guide rail, should be cleaned in time to prevent the machine from jamming during the working process due to the interference of the debris.

Again: After adding the oil, move slowly back and forth to ensure that the lubricant can be evenly added to the guide rail and the lead screw. If the machine is not used for a long period of time, it should be refueled regularly to ensure the flexibility of the transmission system. Clean the guide rail and the lead screw, and use a cloth (without hair removal) to clean up the oil stains and material debris on the guide rail and the lead screw. Because the temperature is low, you can add oil to both the guide rail and the lead screw, and antifreeze oil should be added. The refueling cycle is twice a month, that is, refueling once every two weeks. Add cooling water or coolant to the CNC economical woodworking engraving machine, and keep the cooling water free of impurities.

When using woodworking engraving machine in winter, be sure to pour out the water in the water tank in time when the machine is not in use to prevent freezing and cracking of the water tank and water pipe. The temperature in the operating workshop should be appropriately high, as the woodworking engraving machine's water tank is likely to freeze in winter. The temperature does not have a great impact on the woodworking engraving machine, but because the user puts butter on the lead screw and forgets to clean it in winter, it will not run every time when it is turned on. The temperature in some studios is very low. Although the oil is added, it still freezes. It's on, the machine won't work.