Foam engraving machine operation precautions?

Foam engraving machine operation precautions?

1. Check whether all parts of the foam engraving machine equipment are in good condition, and adjust them regularly. root

2. Check whether the connection between the machine tool and the console is correct, whether the input signal is consistent with the moving direction of the mop, and adjust the high-frequency pulse power supply.

Foam CNC Machine

3. Check whether the vertical and horizontal travel of the workbench is flexible, whether the forward and backward movement is flexible, and whether the column moves at the position of the travel switch between the two baffles. After passing the inspection, you can turn on the power.

4. When installing the work piece, put the work piece to be cut on the installation platform and fix it with the pressure plate screw. When cutting the entire cavity, the work piece must not come into contact with the mounting platform.

5. When the cutting stops or the processing is completed, the inverter must be turned off first, the high-frequency power supply must be cut off, and then the working fluid pump must be turned off.

6. The workbench, ball screw, and roller guide rail should be kept clean at all times, and dust should not enter, so as not to affect the movement accuracy.

Hot wire Foam Machine

7. The operator of the foam engraving machine cannot move the electrical components and the console device. If a problem is found, stop immediately and notify the maintenance personnel for maintenance.

8. During the operation of the machine, cut off the power supply, wipe the machine and control equipment clean, keep them clean, cover the guide rails of the machine with a cover and clean them to prevent dust and knives from being contaminated on the guide rails of the machine.

The above are the precautions for the operation of the foam engraving machine. If you want to buy a CNC router, welcome to contact Superstar CNC at any time.