How to solve the smoke when the woodworking engraving machine is engraving?

When we use woodworking engraving machine to engrave MDF, we sometimes encounter the situation of MDF smoking, which affects the engraving safety and engraving effect of the woodworking engraving machine. The reason for this phenomenon of wood carving machine is mostly because the operator is unfamiliar with the operation or does not master the amount of the spindle.

So, how do we solve the problem of smoke when engraving?

1. First of all, we need to consider the amount of knife required for cutting, which requires designing the relief path and setting the engraving knife path in layers according to the thickness of the plate, the knife diameter, the engraving depth, etc., so that it is easy to remove the sawdust without Excess wood chips can also largely avoid the occurrence of smoking problems;

2. When using the wood cnc engraving machine to cut the plate, it is best to use a multi-blade spiral knife for processing. According to the processing power of the engraving machine, set a reasonable cutting depth; the spiral knife can remove the wood chips well;

3. The setting of the feed speed and spindle speed of the woodworking engraving machine should be reasonable during processing. The larger the diameter of the tool, the lower the speed requirement. The faster the processing, the higher the speed requirement. The larger the cutting depth, the slower the speed. Avoid high speed Low feed, so it is easy to wear the tool.

Superstar CNC recommends products for you：1300*2500mm wood cnc router 3 axis woodworking engraving machine for cabinet furniture door