If the woodworking engraving machine is not used for a long time, it should be regularly refueled and idling

Woodworking engraving machine is not only used in wood processing industry, but also used in advertising signs, furniture manufacturing, toy gift manufacturing, decoration industry, PCB production, etc.

Precautions for use:

1. After setting the engraving position, set the X, Y, and Z axis workpiece coordinates to "0".

2. Adjust the engraving speed and the rotation speed of the spindle motor to prevent the knife from being broken when the engraving speed is too fast or too slow.

3. During automatic tool setting, pay attention to the insulation between the tool setting block and the aluminum table of the engraving machine.

4. When engraving, if you are not sure about the knife or you are afraid of making mistakes, you can slow down the feed speed, and then adjust the speed back to normal when you feel that the engraving is normal; you can also simulate engraving in the idle process to see if it is normal.

5. If the woodworking engraving machine is not used for a long time, it should be refueled regularly every week, every week, to ensure the flexibility of the transmission system.

6. The continuous operation time of the woodworking engraving machine is required to be less than 10 hours/day; to ensure the cleanness of the cooling water and the normal operation of the water pump, the water-cooled spindle motor must not be lacking in water, and the cooling water should be replaced regularly to prevent the water temperature from being too high and circulating As much water as possible, you can change to a large-capacity water tank.

7. After each use of the woodworking engraving machine, pay attention to cleaning, clean up the dust on the platform and transmission system; regularly lubricate the X, Y, and Z axes of the transmission system.

8. The operator should wear dust masks and protective glasses when operating the woodworking engraving machine to prevent the dust generated during processing from invading the human body and causing discomfort.

9. The daily maintenance method of woodworking engraving machine should add a certain dust-proof and dust-removing device to the woodworking engraving machine, and choose the dust-removing equipment for supporting use.