Maintenance guide for automatic edge banding machine

The automatic edge banding machine is mainly used in the edge banding process, the edge banding speed is fast, the quality is high, and the function is very powerful in the processing process, so do you know how to maintain the edge banding machine? What is the specific method?

Automatic Edge Banding Machine

1. The edge trimming and edge throwing functions of the automatic edge banding machine cannot work normally.

If the plate is not pressed tightly or the front and rear heights of the pressing vertical plate are not the same, when the plate moves to the gluing part, due to the certain pressure exerted by the gluing wheel and the pressing wheel on the plate surface, it is easy to cause the plate to be biased. shift, deviate from the baseline, resulting in the inability to continue the follow-up work.

Processing Method: Press the plate tightly, and the front and rear tightness are the same, then fix the reference ruler and profiling wheel of the trimming knife to the plate surface, and finally adjust the knife so that she can achieve the ideal edge sealing effect .

2. No flat surface found on the trimming reference plane

The trimming blade can accurately trim the standard line shape. It is composed of a trimming knife (oblique pressing wheel or arc leaning plate) and a horizontal ruler next to the vertical ruler (profiling wheel). If you can't stick to the sidewalk board tightly, there must be no way to repair the proper lines.

Processing Method: move the strip to cover polishing, edge scraping, scraping, precision trimming, run at this position, and use the surface of the steel plate as a reference, place the above-mentioned horizontal and vertical reference materials on the board. Move the blade close to the board until it is adjusted to the desired effect.

Regarding the adjustment method of the automatic edge banding machine, the above content has been introduced for you. If you find these problems during the edge banding, you can refer to the above method to adjust, so as to achieve high-precision production and processing.