Precautions for fast engraving of woodworking engraving machine

The woodworking engraving machine can speed up the processing speed while ensuring the quality of the engraving, but when the machine speeds up, there will be some unexpected small problems, so how can we avoid these problems while still processing fast and high quality?

Let's take a look at the dos and don'ts for quick engraving for big woodworking customers:

1. Like those carved objects with irregular shapes, although they appear to be firm on the surface, they will shake back and forth when under pressure. At this time, you can try to put some scrap under the object to increase the friction. You can also keep the packaging that comes with the item. Although the object is irregular in shape, the packaging itself may be very regular and easy to be fixed. With a small strap, the irregularly shaped object is very easy to fix. Easily fixed. Or fix its regular parts with tools and discard those irregular parts.

2. Check whether the pliers or chucks selected for engraving are used correctly. At the same time, the wear of the pliers or chucks of the wood work machine will also cause the dislocation of the engraved objects. If the pliers or chucks are too tight, the engraved object will also be ejected at the moment when the cutter head touches the engraved object.

3. If the pressure on the engraved object is very large, consider whether to use a conical knife. If the moving pressure of the diamond cutter head of the engraving machine is too large during the engraving process, the pressure on the side of the tool will cause the movement of the engraved object. The same problem can be caused if an incorrect diamond knife is used. A 90 or 100 degree diamond knife will carve deep into the material, causing the material to move as it is being carved.

4. For engraving plastic patterns, you can stick the transfer tape on the back of the object to be engraved, and then spray the side with the tape with liquid spray glue, and then stick it on a surface that can be voided, so as to avoid the use of double-sided glue, leaving a hard-to-clean surface. Because the transfer tape is easy to peel off and clean up. Use a special engraved tape that is more sticky on one side than the other, so the plates can be moved or replaced at will.

5. Since the woodworking engraving machine is often equipped with multi-functional pliers or chucks, and they are made of iron, it is easy to cause damage to the engraved object or make it slip off during the engraving process, so choose some rubber caps or rubber tubes. Fixing for the engraved object will help.

Now many engraving machines will have the choice of table top material, including vacuum adsorption, suction and clip integration, etc., you can choose according to your own processing material needs.

The above is the introduction to the precautions for fast engraving of cnc machine wood engraving. If you have any comments or suggestions, you can feel free to contact us~

Superstar CNC recommends you:Superstar CNC CX - Double Heads Woodworking Engraving/Cutting Machine