The difference between woodworking engraving machine and stone engraving machine

In a broad sense, engraving machines can be divided into advertising engraving machines, woodworking engraving machines and stone engraving machines, and advertising engraving machines can be understood as low-end woodworking engraving machines, but the height of the gantry is only 15 cm. Today, Superstar CNC mainly talks about it. The difference between woodworking engraving machine and stone engraving machine, the first thing you need to understand is the definition of these two kinds of engraving machines.

Woodworking engraving machine is widely used in the home decoration industry to make partitions, background walls, lattices, waistlines, hanging screens and screens. The furniture industry makes furniture carvings and antique furniture. In the wooden door industry, it mainly carves pine boards, oak, logs and MDF to make wooden doors, sliding doors, cabinet doors, etc. In the wedding industry, it is mainly used to make wedding props and photo frame cutting. The musical instrument industry mainly produces classical musical instruments, in addition to that, it can also be used for cutting special plates in the industrial industry. The stone engraving machine is a high-tech fully automatic computer-controlled engraving equipment that can engrave calligraphy and painting on natural stone, glass and ceramics. Alright, then let's talk about the differences between them:

Woodworking Engraving Machine

1.Spindle motor

Woodworking engraving machines commonly use water-cooled spindle motors and air-cooled spindle motors, and their power is large or small, 1.5kw, 2.2kw, 3.7kw, 5.5kw, 6.0kw or even higher, while stone engraving machines commonly use high-power water-cooled,The main reason for the spindle motor is 4.5kw or 5.5kw, mainly because the woodworking industry can be subdivided into many types, such as the coffin and longevity industry, which needs a low-power woodworking engraving machine, while the wooden door cabinet door industry needs a high-power spindle Motor, let's talk about the stone carving industry, because the material is generally very hard, so it needs a high-power main motor, so that the carving can be smooth.

2.Appearance

When you inspect the manufacturer, you can obviously judge whether the machine is a woodworking engraving machine or a stone engraving machine from the appearance. An obvious difference is that the stone engraving machine is equipped with a sink. Its purpose is to drain water, because when carving stone A lot of heat will be generated, so the stone engraving machine needs the water pump to flush the spindle motor all the time, on the one hand to cool the spindle motor, and on the other hand to clean the dust generated during engraving.

3.Fixed way

The woodworking engraving machine can be divided into two methods: fixture fixing and vacuum adsorption, while the stone engraving machine can only be fixed with a fixture. The reason is very simple. The vacuum pump cannot work on such materials. Secondly, the stone itself is relatively heavy, and it is not easy to engrave. Shake occurs.

Stone Engraving Machine

4.table height

The height of the bed of the woodworking engraving machine is generally 60-70 cm, while the height of the stone engraving machine is generally 45 cm. This is mainly because the stone materials are heavier and easier to load.

5.Engraving Medium

In one sentence, the woodworking engraving machine can engrave the materials, and the stone engraving machine can engrave, but the woodworking engraving machine must not be used to engrave stone.

The above is the difference between woodworking engraving machine and stone engraving machine. I believe that after reading this article, you can better understand the industry of engraving machine.