The effect of woodworking engraving machine processing accuracy on the quality of wooden doors

The processing accuracy of the engraving machine has a direct impact on the quality of the processed product. Superstar CNC will analyze the impact of machining accuracy on product quality from the perspective of the installation location, ambient temperature, power supply, and use specifications of the engraving machine equipment.

1. Woodworking engraving machine requirements for installation location

First of all, the woodworking engraving machine should be installed far away from the power source, avoid direct sunlight and thermal radiation, and avoid the influence of humidity and airflow. If there is a vibration source near the machine tool, an anti-vibration trench should be set around the machine tool. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, and cause poor contact of electronic components, failures, and affect the reliability of the machine tool. Enterprises with conditions should place the woodworking engraving machine in an air-conditioned environment as much as possible, and maintain a constant room temperature. The more expensive the machine tool, the more it should be used in an air-conditioned room to avoid unnecessary loss of accuracy.

2. Woodworking engraving machine requirements for ambient temperature

Due to geographical differences, and machine tools have relatively high requirements for ambient temperature, in general, exhaust fans or air coolers are installed in the electrical boxes of CNC machine tools to keep the working temperature of electronic components, especially the central processing unit, constant Or the temperature change is small. However, this is still not enough to ensure the accuracy loss of the machine tool during processing, because the equipment will generate too high temperature during the processing process, which will cause the life of the control system components of the CNC machine tool to be reduced. The increase in temperature and humidity will also increase dust and cause adhesion on the integrated circuit board, leading to short circuits and machine failures. Therefore, it is best to keep the environment around the machine tool constant. In addition to temperature, the CNC machine tool should not be placed in a place with corrosive gas. If the electronic components are corroded by the corrosive gas and the system is short-circuited, the serious consequences can be imagined.

3. Woodworking engraving machine requirements for power supply

Woodworking engraving machines need electricity to operate the equipment, and companies that generally use woodworking engraving machines for processing often do not have only one piece of equipment. There are more equipment, and when used at the same time, the power grid will fluctuate greatly, which affects the effect of processing accuracy. . Therefore, when installing equipment, it is necessary to strictly control and select the power supply used. Only by controlling the voltage fluctuation within a safe and stable range, can it not affect the machine tool processing and the normal operation of the CNC system.

4. Specification for the use of woodworking engraving machine tools

When using a woodworking engraving machine, it must be operated in strict accordance with the standards and parameters set by the manufacturer. When operating the machine tool, the user cannot replace the machine tool accessories at will, such as using a hydraulic chuck that exceeds the specifications in the manual. When setting up the accessories, the manufacturer fully considers the matching of the parameters of each link, and blind replacement causes the mismatch of the parameters of each link, and even causes unexpected accidents. The pressure of the hydraulic chuck, hydraulic tool rest, hydraulic tailstock, and hydraulic cylinder should be within the allowable stress range, and any increase is not allowed, otherwise safety accidents will easily occur.

The above is Superstar CNC the analysis of the impact of processing accuracy on product quality from the perspective of the installation location of the engraving machine equipment, ambient temperature, power supply, and use specifications. The engraving machine must be used rigorously to extend the service life of the engraving machine.

Woodworking Engraving Machine 

CX-1325 Single head wood carving machine, DSP control system, 25 square rail, suitable for wood carving and cutting, support customization.CNC wood router is a kind of wood cutting and engraving machine mainly used for wood cutting and engraving. The high-speed rotation of the spindle drives the milling cutter to engrave the material.

Advantages

Simple operation, high efficiency, beautiful appearance

As a unique professional technology, CNC wood router has the following characteristics in application:

1. Use high precision and high speed spindle motor

2. Combination of artistic surface modeling method and geometric surface modeling method

3. Combination of precise drawing mechanism and artistic drawing mechanism

4. High-speed engraving technology and process for small tools

5. The vacuum adsorption table is connected with a vacuum pump through pipelines. There are many adsorption holes on the carving machine table surface. The negative pressure generated by the vacuum pump is firmly absorbed on the table surface by the vacuum pump. It has high efficiency and fast speed, and is suitable for carving wood doors and panel furniture.

6. DSP A11 Control system has stronger anti-interference performance and passed CE test.Support breakpoint and power down function.

Applicable Industry

Billboard industry: large-word cutting, sign making, LED/neon trough, hole-shaped literal cutting, blister light box mold making, etc.

Woodworking industry: hollowing, grate, relief and other processing of MDF, MDF, etc.