What are the installation points of computer engraving machine

The installation work before using the computer engraving machine is a very important step, so this work must be fully paid attention to. And it needs to be installed and operated by professionals who have mastered the following points, because only the installation can be successfully completed and hidden dangers can be avoided in future use.

What are the installation points of computer engraving machine

1. To ensure safety issues

When installing the computer cnc engraving machine, this operation cannot be performed in thunderstorm weather, because not only lightning and thunder may cause safety accidents at this time, but also the humid air may cause electric shock, so it should be operated in dry and sunny weather. At the same time, good-quality computer engraving machine manufacturers also remind that power sockets cannot be installed in particularly humid locations, and operators must know how to install them in accordance with strict safety regulations.

2. the power supply voltage and wiring should meet the specifications

In order to ensure that the woodworking engraving machine can work stably, it must be provided with a very stable power supply voltage, and the voltage range must meet the specified requirements, otherwise there should be professional technical personnel to guide and select a regulated power supply or take some measures to meet the requirements of use. At the same time, note that the computer engraving machine and the control cabinet must be grounded, and data cables cannot be plugged in with electricity, so such illegal operations should be avoided.

3. to install firmly in place

When installing the computer engraving machine, the relevant screws should be installed in place, but at the same time, it should not be too hard to avoid the phenomenon of slippage. The high-quality and low-cost computer engraving machine manufacturers emphasize that especially the position of the tool needs to be engraved, so the installation must be firm enough and the tool should be clamped. During use, the sharpness of the tool should be maintained to meet the requirements, otherwise it should be replaced in time. In order to avoid overloading the motor and affecting the engraving effect due to the insufficient sharpness of the knife.

The above are several aspects of the installation points of the computer engraving machine. In addition, there should be professional guidance when moving the machine. If you find any abnormal situation when installing or using the computer engraving machine, you should troubleshoot according to the operation manual or contact the dealer immediately to solve it, and do not disassemble and assemble without authorization to avoid man-made damage.