What is a stone cutting machine
You are here: Home » Applications » Applications » What is a stone cutting machine

What is a stone cutting machine

Stone cutting machine is a multifunctional stone cutting machine consisting of a cutting tool magazine, a stone conveying table, a positioning cylinder and a lathe. This stone cutting machine can cut stones at different depths, greatly saving stone resources and also beneficial protect environment. Various types of stones can be mechanically cut and processed, with high processing efficiency, effective use of small stones, and lower production costs.

stone engraving cnc router

1. Composition and use

The stone cutting machine is suitable for all kinds of stone, building materials, ceramic tiles, granite, marble, cement boards, red bricks, refractory bricks, etc. It is an indispensable weapon for home decoration.

The stone cutting machine can cut stones at different depths respectively, which can greatly save stone resources and also help protect the environment. Various types of stones can be mechanically cut, and the processing efficiency is high. In addition, the effective use of small stones makes the production cost lower.

2. Operation precautions

Before work: 1. Wear work clothes, goggles, and work caps. 2. Carry out detailed inspection on the power switch, the tightness of the saw blade, the saw blade guard or the safety baffle. The operating table must be stable, and there should be sufficient lighting for night operation. 3. Turn on the main switch, try a few turns without load, and allow it to start after confirming safety.

At working: 1. It is strictly forbidden to operate with gloves. If dust is caused during operation, wear a mask or face shield. 2. Do not try to cut small unclamped workpieces. 3. The stone cutting machine is only allowed to cut profiles. 4. Do not perform strong cutting operations, and make the motor reach full speed before cutting. 5. No one is allowed to stand behind the saw. 6. Do not lean over or bypass the saw, and do not loose any hand or raise the arm from the saw or workpiece when the saw blade is not stopped. 7. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade. 8. Before repairing or replacing parts, you must cut off the power supply and wait for the saw blade to stop completely. 9. If any abnormal sound is found, the inspection should be stopped immediately.

After work: 1. Turn off the main power supply 2. Clean and tidy up the workbench and the site


The above is the introduction and operation precautions of the stone cutting machine summarized by Superstar CNC, which can provide a more comprehensive understanding of the stone cutting machine. If you have any questions about the machine, please contact us in time, we will give you the most comprehensive answer.





   Add : No.7 Mingjia East Road,South Of Industrial Park North Road,Ecnomic Development Zone,Qihe County, Shandong Province, China.
   Fax : +86-531-55554341
   Phone : +86-15753882272
   E-mail : superstar@cncrouter.cn
   Whatsapp : +86-15753882272
   Youtube : luhua7519@gmail.com
   Facebook : @superstarcncrouter
Copyright  2021 Jinan Jinshengxing Machinery Manufacture Co., Ltd.    Technical Support : sdzhidian