What is the processing flow of the panel furniture production line?

The panel furniture production line is composed of a variety of CNC equipment. The equipment is generally CNC cutting machine, automatic edge banding machine, infrared side hole machine and furniture design and dismantling software. It can be said that a set of economical panel furniture Production line, this equipment is easy to operate and efficient, so do you know what the processing flow of this production line is? Next, Superstar CNC will give you a detailed summary;

The specific workflow is to punch the reverse side first - punch the front side - cut the material.Take the CNC cutting machine with automatic loading and unloading platform as an example:

Step 1: There is an infrared automatic sensing system on the automatic loading and unloading platform, and the lifting and lowering of the automatic loading and unloading platform is controlled by the infrared automatic sensing system. When the height of the board on the platform does not reach the infrared sensing range, the automatic feeding platform starts to rise until it is sensed by infrared rays.

Step 2: There is a suction cup on the CNC cutting machine, and the suction cup is brought to the automatic feeding platform through the use of the beam of the CNC cutting machine. The suction cup is automatically controlled by the CNC woodworking cutting machine to be adsorbed on the plate, and the beam of the CNC cutting machine and the feeding roller above the CNC cutting machine cooperate together to transport the plate to the vacuum adsorption table.

Step 3: The positioning cylinder on the vacuum suction table of the CNC cutting machine automatically rises to determine the initial position of the plate. The column of the CNC cutting machine and the cylinder next to the feeding roller form a right angle of 90 degrees with each other, so that the positioning is more accurate.

Step 4: The double-layer vacuum adsorption table of the CNC cutting machine adsorbs the board and firmly fixes it on the table to play a clamping role. Then the positioning cylinder, vertical cylinder and feeding cylinder of the CNC cutting machine are returned.

Step 5: Punch vertical holes on the reverse side, then flip the plate and repeat Step 3.

Step 6: Punch vertical holes on the front, and then the CNC cutting machine will cut the plate according to the automatic cutting optimization software, that is, cutting.

Step 7: After the cutting of the CNC cutting machine is completed, the suction effect of the vacuum adsorption table is automatically cancelled, and the pushing device on the CNC cutting machine is used to push the opened plate to the blanking platform.During the cutting and pushing process of the CNC cutting machine, the secondary dust is removed.

The cutting stage is the main part of the entire panel furniture production line process. After the equipment is cut, it will enter the edge banding process. It is recommended to use a fully automatic linear edge banding machine with pre-milling function, and it is relatively simple to apply an infrared side hole machine in the side hole punching stage, with high speed and simple operation.

Regarding the processing flow of the economical panel furniture production line, in the above content, Superstar CNC has been summarized for everyone in detail. There are seven steps in total. These seven steps determine the effect and smooth process of the processing. I hope it can help everyone.