close
Choose Your Site
Global
Social Focus
Views: 500 Author: Superstar Publish Time: 2023-03-03 Origin: Site
The wood beam saw has the advantages of high cutting precision and simple operation when it is used. So it is very popular with everyone. However, if it is not operated properly, there will often be some problems with the machine, which will shorten the life of the machine.
1. Employees are not allowed to put their hands into the pressure beam during operation, and do not open the back cover of the machine head to avoid accidents.
2. Turn off the power before replacing the saw blade of the electronic cutting saw, adjusting the machine or performing maintenance.
3. When operating the beam saw, it is recommended that the operator is strictly forbidden to wear loose clothes, the sleeves are rolled up to the elbow or the buttons are fastened, the long hair should be coiled up, and gloves are not allowed.
4. During the operation of the beam saw, the wood is placed neatly, and the hands should not be close to the cutter. Here, it is also necessary to pay attention to the hands not to be crushed by the cake.
5. During the operation, it must not be pushed forward when the cake is not pressed against the wood, so as to prevent the wood from being hit by the knife and hurting people.
6. Before processing the beam saw, check whether the saw blade is sharp. Here, attention should also be paid to prevent the cracking of the board caused by the saw blade not being sharp and affecting the processing quality.
7. Before starting the beam saw, carefully check whether the machine head and tool holder are at the mechanical origin.
The above are the things that need to be paid attention to when operating the beam saw. When replacing the saw blade, adjusting the machine or maintaining the beam saw, all you have to do at this time is to turn off the power, that is, the main switch of the machine.
If you want to buy a CNC router, welcome to contact Superstar CNC at any time.