close
Choose Your Site
Global
Social Focus
Views: 500 Author: Superstar Publish Time: 2023-02-24 Origin: Site
During the production process of panel furniture, if the edge banding is not strict during the edge banding process, it will seriously affect the quality of the entire furniture, and at the same time affect the aesthetics of the furniture. Once the edge banding machine is not tight, how to solve it?
6 Functions of Automatic Edge Banding Machine
The reason why the edge banding of the wood edge banding machine is not strict?
Hot melt adhesive temperature, substrate temperature, edge banding material temperature and working environment are all very important influencing factors. If the temperature is too low, it will cause the hot melt adhesive to solidify in advance, causing the glue to stick to the board, but cannot firmly stick to the edge banding material. The temperature of the base material should be kept above 20 degrees
The glue seam between the edge banding board and the edge banding will have a bad effect on the appearance of the panel furniture. If the amount of glue is too large, the glue seam will be obvious, otherwise the strength of the edge banding will be reduced, resulting in discontinuous or uneven glue seams There are many reasons for this phenomenon.
Edge Banding Machine for Wood Edge Banding
The following factors should also be considered comprehensively: the cutting accuracy of the board, whether the edge of the board maintains a 90° angle with its plane; Whether the roller is in good condition, whether the hot melt adhesive is even on it, and whether the amount of coating is appropriate; the board with good edge sealing should be placed in a clean place with less dust.
If you want to buy a CNC router, welcome to consult Superstar CNC at any time.