You are here: Home » News
Wood Engraving Router.jpg
4 common problems of woodworking engraving

The woodworking engraving machine will inevitably have some problems during the day-to-day work. Some of the reasons are due to the configuration of the machine itself, and some of the reasons are due to customer misoperation,The following Superstar CNC briefly introduces 4 common problems and their

2021 12-18
Wood Engraving Router.jpg
What kinds of knives are commonly used in CNC woodworking machines

Commonly used tools for CNC woodworking engraving machines:1. Flat-bottomed knives, also called column knives, mainly rely on the side edge for carving, and the bottom edge is mainly used for flat polishing. The end face of the head of the column knife is large, and the engraving efficiency is high.

2021 11-30
Wood Engraving Router.jpg
Woodworking engraving machine tool wear, purchase method and prolong service life

After the woodworking engraving machine was used, some customers reported the problem of tool wear during the use of the tool. So how to reduce the tool wear of woodworking engraving machine and increase the service life of the tool? In addition to solving these problems, Superstar CNC also sorted o

2021 11-26
wood carving cnc router.jpg
Analysis of the Causes of Broken Knives of Woodworking Engraving Machines and Solutions

Many woodworking engraving machines in many furniture factories are working every day. It is inevitable to work overtime if there is a large demand order. In this case, it is often difficult for the staff to spare time to maintain and inspect the machine. There will be various failures, such as a br

2021 11-15
stone engraving machine.jpg
The carving machine Maintenance in winter

Carving machine Maintenance in winter,carving machines using water cooling spindle: Because the temperature drops in winter, carving machines using water cooling spindle must pay attention to the indoor temperature to prevent the water tank in the water cycle from freezing, causing the water cycle t

2021 11-10
automatic stone engraving machine.jpg
Is the power of the spindle of the engraving machine the bigger the better?

The choice of the spindle power of the engraving machine is not that the greater the power, the better. The power of the spindle motor of the engraving machine should be selected according to the object to be engraved.The following Superstar CNC will introduce the choice of the spindle power of diff

2021 11-04