Analysis of various components of CNC cutting machine

Regarding the various components of the CNC cutting machine, in fact, many people do not have a special understanding of this. For this reason, Superstar CNC will introduce the various components of the cutting machine in detail, hoping to help everyone.

The motor power of the spindle motor CNC cutting machine will be relatively large. Generally, 3.5kw, 4.5kw, and 6kw are selected according to different configurations. The main functions are punching, cutting, and grooving. In addition, the different heat dissipation methods of the motor will also cause the price of the equipment to fluctuate. For example, the current motor is divided into two modes: water cooling and air cooling. The water-cooled motor is based on its own water circulation, and the air-cooled motor uses a fan to dissipate heat. Essentially, water-cooled motors are better than air-cooled motors. However, the facilities required for water-cooled motors are expensive, and once damaged, replacement costs are high. The common problem with air-cooled motors is the fan, which is relatively noisy. However, it is easier to replace the fan when it is damaged.

Why is it sometimes said that the CNC cutting machine should keep pace with the times? It is because the cutting machine has something called a reducer, which is also the main reason. The cutting machine equipped with the reducer can obtain more torque, increase the kinetic energy of the machine, increase the efficiency of the machine, and prolong the service life of the machine.

The difference between countertops and vacuum cleaners is not only the precision, but also the dust removal effect of adsorbing countertops and equipment. Just like the question about the adsorption table, there is no problem with putting a whole large board on it, but if you open a small board, there will be no adsorption. The sawdust produced by cutting is brushed off by the brush under the dust cover on the main shaft, and then sucked up by the vacuum cleaner, which is often referred to as the secondary automatic dust removal function.

Positioning and pushing, the positioning function cannot be fixed on one side, so the positioning of the cutting machine should be at least two sides, and the higher configuration should be three sides, that is, the left front side and the right side. Standard automatic tool setter enables accurate positioning and thus good accuracy. The cutting machine will see the same thing as the "track" on the top, which is called "towline". Depending on the configuration, the X, Y, Z axis towline specifications are different, and the control panel is also different.

The main function of the frequency converter is to control the start, stop and speed of the main shaft, thereby protecting the machine from overcurrent, overvoltage and overload, and preventing damage to the motor when the voltage is abnormal. The frequency converter is usually 7.5kw.

Superstar CNC introduced the various components of the CNC router cutting machine above, from which we learned that each component of the equipment plays an important role. I believe you will have a new understanding and understanding of this after reading it. If you want to know more, you can follow our website.