CNC cutting machine plate edge collapse solution

The boards used in cutting materials include density board and particle board. These two boards have relatively high hardness, but they are widely used in the production of board furniture due to low cost and easy processing. However, these two boards have the same disadvantage, that is These two kinds of plates are pressed, which means that they are not a whole.If the bonding strength is not strong, it is easy to collapse when the material is cut.

Solution:

The choice of the board may make us unable to change, but we can choose a good CNC woodworking cutting machine, the edge chipping mainly occurs in the table saw and the cutting machine with poor quality, and the Superstar CNC cutting machine will not appear. Collapse due to equipment reasons.

Why are there burrs on the plates processed by CNC cutting machine?

1. The sharpness of the tool

The CNC cutting machine uses a tool to cut the material, and the sharpness of the tool directly affects the roughness of the cutting surface. If the sharpness of the tool is not strong, then the plate that is driven in will appear to collapse, and it is not recommended that the cutting rate be too fast when the tool is in poor condition.

Generally speaking, due to different manufacturing processes, the impurities in the multi-layer board are much less than that of the particle board, but in the process of purchasing the board, you should also keep your eyes open and choose a board supplier with stable quality to prevent the following situations: damage to the tool If the matter is small, the damaged equipment will delay the construction period, or even the industrial matter will be a big story, the choice of sheet metal is very important!

2.Plate material

The plates used in the production of cutting materials include MDF and particleboard. The hardness of these two kinds of plates is relatively high, but these two kinds of plates have the same problem, that is, these two kinds of plates are pressed, which means that they are not a whole, and if the bonding strength is not strong, the cutting It is likely to collapse.

3. The tool clamping is not strong

The tool clamping of the CNC cutting machine is not strong, and the chipping of the plate and the damage of the tool will occur in the process of processing the product.

4. Spindle speed

It's the same thing as the sharpness of the tool.If the spindle speed is not enough, the plate that the cabinet cutting machine drives into is very likely to appear chipped. When the spindle speed is adjusted to a high point, it is necessary to pay attention to the adjustment within the scope of use of the tool.

5.The vacuum adsorption effect is poor.

The vacuum adsorption table adsorption ability of some cutting machines is not very strong. When the product is processed, the workpiece adsorption is not strong, resulting in the displacement of the plate and the collapse of the plate.