How to check and clean up CNC cutting opportunities better?

There is a lot of dust in the CNC cutting machine during the working process. Some users will think that the cutting machine itself is a machine used in dust, so it is troublesome to clean every day, so many people do not clean it, even if the machine is full of things , I don't know how to clean it, which will seriously affect the performance and work of the cutting machine. Next, Superstar CNC will introduce you to the method of checking and cleaning the cutting machine?

1. Inspection and cleaning of the mechanical part of the CNC router machine.

(1) Regularly clean the equipment control box.

(2) Clean the screws regularly to prevent foreign objects from sticking to the screws. The screw is important in the equipment, it determines the precision of the machine, and also plays an important role in the transmission process.

(3) After the cutting work is completed, the countertop should be cleaned in time to provide convenience for the next step of the woodworking cutting machine.

(4) Clean up the guide rail and the material debris beside the guide rail to prevent the machine from being stuck due to the interference of the debris during the working process.

2.CNC cutting oil pollution and waste oil treatment.

The maintenance of the woodworking cutting machine should be lubricated in time, and slowly walk back and forth after adding oil. It is required that the lubricating oil can be added to the guide rail and lead screw evenly.

After the machine is not used for a long time, try to clean the grease, waste oil and material debris on the guide rail and lead screw with a cloth (without hair removal), so that the parts can be operated flexibly.

3. Check and clean up the computer of the CNC cutting machine.

Computer abnormalities can also cause many problems, especially the computer connected to the cutting machine, which should be regularly checked and cleaned of loopholes and computer space.

(1) Clean up regularly, but be careful not to clean up during work, causing interference.

(2) Regularly clean the dust of the chassis, pay attention to the heat dissipation of the cutting machine, and pay attention that too much dust will cause errors in the pen.

(3) Regularly adjust the system software and optimize the computer system.

To sum up, it is necessary and effective to inspect and clean up the above three aspects of the CNC wood cutting machine, which will be beneficial to the maintenance of the cutting machine, and also conducive to the timely detection of problems and faults and timely solutions.