Multi-process woodworking engraving machine operation skills

In recent years, the whole house customization industry has also developed rapidly. The market has more demand for the woodworking industry, and customers have higher and higher requirements for product quality. The ordinary wood cnc carving machine has been unable to meet the needs of customers. Improvement We now have four-process cutting machine, follow-up tool change machining center, side hole machine, edge banding machine and other panel furniture production line equipment.

Usually before we start work, we have to make adequate preparations to ensure the normal operation and work of the multi-process woodworking engraving machine. Let's do this first:

1. Protect the engraved objects: During the engraving process, the engraved objects are often misplaced. In order to avoid these problems, we can try the following operations: Check whether the pliers or chucks selected for engraving are used wrong? Worn pliers or chucks can also cause misalignment of the engraved object. If the pliers or chucks are too tight, the engraved object will be ejected at the moment when the cutter head touches the engraved object.

2. For those carved objects with irregular shapes, the surface seems to have been fixed very tightly, and they will shake back and forth when subjected to down pressure. Try putting some scrap under the object to increase friction, and keep the packaging that comes with the item and is easy to fix.

3. If the downward pressure on the object to be engraved is very large, consider whether you need to use a tapered knife nose. If the pressure of the diamond cutter head is too large during the engraving process, the pressure on the side of the tool will cause the movement of the object to be engraved. . The same problem can be caused if an incorrect diamond knife is used.

4. For engraving plastic patterns, you can stick the transfer tape on the back of the object to be engraved, and then spray the side with the tape with liquid spray glue, and then stick it on a surface that can be voided, so as to avoid the use of double-sided glue, leaving a hard-to-clean surface.

Now the cnc routers wood 4 axis will be equipped with a double-layer vacuum adsorption table to make the engraved object more firm and not easy to move.

Superstar CNC recommends products for you : CX-1325 woodworking Automatic mulity CNC Router