Simple method to detect the accuracy of CNC cutting machine for panel furniture

In the past, when major furniture factories used table saws, the processing speed was slow, and a lot of labor was required, but now the emergence of CNC panel furniture cutting machines has greatly increased the processing efficiency and it is easy to operate. With the multi-field application of the cutting machine, the major furniture factories have high requirements on the quality of the products.So do you know how to detect the accuracy of the panel furniture cutting machine?

method 1:

Do a plate processing, measure whether the diagonals of the plates are the same, whether the dimensions of the opposite side are the same, and measure whether the hole margins are the same.

Method 2:

Both sides of the neutral plate of the cabinet are processed to check the positioning accuracy of the flap. Under normal circumstances, single-sided machining does not require too strict positioning accuracy, and the positioning cylinder mainly affects the turning machining accuracy. Punch holes on a board and open double-sided grooves to see if the holes are transparent and whether there are any traces of butt joints. Measure the hole edges on both sides and the groove edges on both sides.

Method 3:

The processing accuracy of small plates should be processed with small plates. It can cut several small boards that will appear in production, such as 300mm*50mm drawer side panels, etc. Look at the adsorption capacity of the table, whether it will be lost, and measure the processing accuracy of the small plate.

Method 4:

You can cut two boards of the same size into one board, put dowels on the four corners, and see if the two boards can be held together with the dowels.

Here are a few simple ways to detect accuracy. The purpose of purchasing the cutting machine equipment is to save time and effort, increase the utilization rate of the sheet, processing efficiency, processing accuracy and quality. A good quality cutting machine can make you do more with less.A poor quality CNC cutting machine wastes manpower, material and financial resources, and even affects your processing speed. Therefore, be careful when purchasing equipment, choose a good manufacturer, and don't be greedy for cheap, which is not worth the loss.

Regarding the four simple methods for testing the accuracy of CNC cutting machine for panel furniture, the above content has been summarized in detail for everyone. From this, we learned that when testing, we should do a good job of testing the board to ensure the accuracy of equipment processing.