What are the reasons for the burrs in the furniture cutting machine?

Panel furniture cutting machines are more and more commonly used now, but there will also be such and other problems. The following Superstar CNC will briefly introduce the reasons for the burrs in the panels processed by the panel furniture CNC cutting machine:

1. The sharpness of the tool

The panel furniture cutting machine cuts the material with a tool, and the sharpness of the tool indirectly affects the roughness of the cutting surface. If the sharpness of the tool is not strong, then the plate that is driven in will appear to collapse, and it is not recommended that the cutting speed be too fast when the tool is in poor condition.

2. Plate material:

The boards used in the panel furniture cutting machine are MDF and particleboard. The hardness of these two kinds of plates is relatively high, but they are widely used in the production of panel furniture due to low price and easy processing. However, these two kinds of plates have the same problem, that is, these two kinds of plates are machine-pressed. , which means that they are not a whole, and if the bonding strength is not strong, the edges will easily collapse when the material is opened.3. Spindle speed

It's the same thing as the sharpness of the tool. If the spindle speed is not enough, the plate that is driven by the cabinet cutting machine is very likely to be chipped. The spindle speed is adjusted higher, and it is necessary to pay attention to the adjustment within the scope of use of the tool.4. the vacuum adsorption effect is poor

The vacuum adsorption table surface of the panel furniture cutting machine produced by some manufacturers is not very strong. When the CNC cutting machine is processing the product, the workpiece adsorption is not strong, resulting in the displacement of the board, which is also the reason for the collapse of the board. . The plate is indirectly adsorbed on the table through the adsorption holes on the table. This type of adsorption table has better adsorption effect, and the plate force will be doubled and averaged, which directly improves the cutting accuracy.

Five, the tool clamping is not strong.

The tool clamping of the panel furniture cutting machine is not strong, and in the process of processing the product, the edge of the plate and the damage of the tool will be formed.