What kind of control system will CNC cutting machine manufacturers choose?

With the rise of panel furniture, the demand for furniture factories is very huge, and some high-efficiency woodworking machinery is needed at this time. When furniture factories choose woodworking machinery, they will choose high-efficiency CNC cutting machines. Since there are many manufacturers, they will inevitably encounter various problems when buying machines. Let's talk about the operation control of CNC cutting machines System selection.

Most customers will think that it is not just some software and a system? Why is there such a difference in price? But what we need to understand is that the numerical control equipment is not only able to run with a single software, different functions and different configurations require the overall planning and control of the system, so the systems with different degrees of good and bad are like different degrees of good and bad. Like computers, they may run the same way, but with the increase in usage and different styles of dismantling orders, a system that is close to the same will have a series of problems such as crashes, processing errors, garbled characters, and freezes, which not only delays production, but also delays maintenance. It is also very troublesome to get up. The more the manufacturers know about the engraving machine, the more they will choose the control system, which not only has fast operation speed, but also has good stability, which fully protects the buyer.

Comparative analysis of control systems:

In fact, most of the woodworking machines use the Weihong system. Sometimes the price of the Weihong system and the SYNTEC system are the same when the engraving machine sellers say that the price is almost the same as the processing. The price of Weihong and the SYNTEC system used in the center is different, but if it is put on the ordinary woodworking machine, it will be different. Some customers do not know that if the SYNTEC system is put on the ordinary woodworking machine, it will not work. It is equivalent to overkill. Some functions of the SYNTEC system are not available, so customers who do not understand should not install the SYNTEC system on ordinary machines. This is a problem that some of our customers should pay attention to. In order to make money, some manufacturers install SYNTEC system for some customers who do not know how to do it. The motors on such machines will be easily burned. If customers have already bought machines, they must pay attention. After installing the SYNTEC system, they must let The manufacturer will replace you with a large motor, so as not to burn the motor and the machine will not work normally, which will delay our construction period.

High-quality CNC cutting machines generally use imported control systems, such as Taiwan's SYNTEC system, LNC system, French rank system, Weihong industrial control system, etc. Each brand system also has a variety of models, such as the SYNTEC system includes Taiwan's new generation 6MA, 6MB, 6MD, 60WA and so on. This is the most important configuration on the CNC cutting machine, and different systems correspond to different price points.

In fact, what kind of machine should be equipped with what kind of system. You can't install a high-end system on a machine with a low configuration, which will be counterproductive. In general, what kind of system should be installed in a CNC cutting machine? The cutting machine manufacturers will recommend it, but some unscrupulous merchants will also install some inferior systems, so when we buy equipment, we should also go to several on-site inspections, so as not to go into a misunderstanding!

The emergence of the CNC cutting machine gets rid of the dependence of the traditional cutting mode on labor, and the vertical holes are also completed at the same time. By combining with the special design and dismantling software, intelligent production can be realized, saving labor, materials, and saving time.