What should I do if the furniture CNC cutting machine encounters a dislocation error?

This article is about the error problem of furniture CNC cutting machine. Superstar CNC will lead you to see how to solve this problem~

It is inevitable for furniture manufacturers to encounter the problem of dislocation errors in the use of CNC cutting machines for processing and production. This problem is limited by the existing technology, and no manufacturer can avoid it. But when you encounter this kind of problem, it can also be solved by the correct solution.

First of all, if you encounter any problems, it is recommended that you contact the manufacturer for consultation, explain the situation to the manufacturer in detail, and make the next decision based on the feedback from the after-sales personnel. Small problems can be solved manually, if it is other big problems, it still needs after-sales door-to-door equipment maintenance.

The following misalignment errors caused by many small problems can be checked by a series of inspections, the problems can be eliminated, and production can be resumed immediately.

1. If the coupling above the spindle motor is damaged or loosened, it may cause a misalignment problem. It needs to be replaced or tightened to solve the problem.

2. If the connection line between the chassis of the CNC furniture cutting machine and the gantry cannot be in contact, it will cause a dislocation error and need to be repaired.

3. Problems with driver layout or electronics can also cause this problem. If the number of misalignment errors is not many, and the material can be cut normally after slowing down the processing speed, it means that the driver is not broken. Otherwise, the drive needs to be patched or replaced.

4. If the voltage is low during the production process, the power supply of the driver is insufficient, which will also cause this phenomenon. It only needs to install a regulated power supply with a 5KW error of no more than 5% to solve the problem.

5. The failure of the main board of the interface board and the adapter board can also cause the engraving dislocation error. In the production process, inspection and maintenance should be carried out in time.

When we encounter any problems during the production process, it is recommended to consult the after-sales personnel first, so as to avoid secondary damage in the process of improper maintenance.