Woodworking engraving machine manual (3)

Whether it is cutting or engraving, the tool is inseparable. The correct use and storage of the tool will greatly increase its service life. Superstar CNC introduces you to some precautions for the tool. I hope you can pay attention to it when using it.

1. Precautions for tool operation:

Taking the woodworking engraving machine of Superstar CNC Company as an example, the tools provided by the company are designed to rotate clockwise.

Be sure to choose the appropriate size of the jacket, those with a cross-section, not round enough to wear and the inner hole with a tapered jacket can not provide enough clamping force, the jacket must be replaced immediately, otherwise it will cause the tool handle to vibrate and fly. Danger of breaking or twisting.

The tool shank jacket should be in good contact, and the tool shank must be fully inserted into the jacket and tightened firmly. When the tool shank is clamped, it is found that the contact marks of the shank are uneven or there are grooves, indicating that there is slippage and the jacket If the inner hole is deformed, the jacket must be replaced immediately.

When the tool is blunt, do not continue to use it. If you continue to process it, the cutting torque of the tool body will increase, which will exceed the bearing capacity of the tool body, cause the tool to break, and even cause industrial accidents.

The flatness and bending of the workpiece are too large, which will affect the service life of the tool. Especially when the cutting depth is greater than the cutting thickness of the cutting edge, high temperature will be generated when the non-edge part is in contact with the workpiece, and the tool will be deformed, causing the tool to bend or Fractures and even industrial accidents.

Please use suitable eyewear guarantees during operation. Body, clothing, hair and sundries should not be near objects at work.

2.the choice of cutting amount

When cutting different materials, the cutting speed is very important to the service life of the tool and the processing quality of the workpiece. A reasonable cutting amount will make the cutting lighter, better and safer.

Larger tools should be cut at low speed and propelled slowly, the propelling speed should be uniform and stable, and the propelling should be continuous. Remember: There must be no stops during the cutting process.

If a larger diameter tool is used, the cutting can be completed in a few advances, which increases the life of the tool and makes the operation safer.

3.the maintenance of the tool

Keep the knives clean and use standard tools-specific solvents to remove dirt, grease and other impurities.

Applying an appropriate amount of mechanical oil can prevent the surface of the tool from rusting and damaging.

Do not over-grind the tool and change the shape of the tool without authorization, because each grinding process requires special mechanical equipment and special grinding skills to meet the requirements of use, otherwise it is easy to cause the cutting edge to break, resulting in industrial Accident.

The bearing cannot be cleaned with solvents such as diesel oil or kerosene, otherwise the special grease inside will be destroyed, and the dust and dirt can be blown out.

The above is about the woodworking engraving machine tool of Superstar CNC Company. If you want to know which equipment you want, you can contact us at any time~