How to solve the uneven depth of the lower knife when the woodworking engraving machine is processed

When woodworking engraving machines are processed in many factories, the depth of craftsmanship is designed according to the drawings made in advance. For example, if the lower knife is 0.5cm, the actual engraving depth is 0.5. But when there is a problem, it is found that the 0.5 is 0.2 in some places, and even 1 in some places. This is a headache.

To find a problem, to solve the problem, you must first understand where the problem occurred. Generally, the uneven engraving of woodworking engraving machine occurs, which is generally caused by the following aspects:

1. The control card is loose or faulty

2. Step-by-step motor failure

3. Drive failure or current subdivision is inconsistent with software settings

4. Z-axis motor line failure

5. Spindle motor failure

6. Inverter interference or wrong data setting

7. Static interference

8. Computer virus or system problem

Woodworking engraving machine has this kind of failure, the best solution is to troubleshoot. Drain most of them according to the actual situation, and then check them one by one. Of course, it is better to find the manufacturer to solve the problems of the pioneer drive, motor, frequency converter, etc.

Superstar CNC recommends products for you：CX -1325 Double Heads Woodworking Engraving Machine for woodworking cabinet