How to choose the correct tool for different cutting materials

When using CNC cutting machine, various types of tools will be used. Improper selection of tools will affect the processing quality and accuracy. So, when we encounter different processes and materials, how should we choose the right tool?

1. For acrylic cutting, it is recommended to use a single-edged spiral milling cutter, which is characterized by fast processing speed, high efficiency and no sticky chips.

Second, cork, MDF, virgin wood, PVC, acrylic large-scale deep relief processing, it is recommended to use a single-edged helical ball end milling cutter.

3. For the cutting of MDF, it is recommended to use a double-edged large chip removal helical milling cutter. It has two high-capacity chip removal grooves and a double-edged design, which not only has good chip removal function, but also achieves good tool balance. , When processing medium and high density boards, it has the characteristics of no blackening, no smoke, and long use time.

4. It is recommended to use edge milling cutter for high density board and solid wood.

5. For burr-free cutting on the upper and lower surfaces, it is recommended to use single-edged, double-edged up and down milling cutters.

6. It is recommended to use multi-stripe milling cutters for roughing particleboard.

7. When processing multi-layer boards and plywood, it is recommended to use double-edged straight groove milling cutters.

The CNC cutting machine manufacturer reminds that the configuration of the general cutting machine is relatively high and the speed is relatively fast, which requires the cooperation of high-quality tools to give full play to its advantages.