How to load and unload tool the woodworking engraving machine

The performance of the woodworking engraving machine itself is important, but the choice of the woodworking cnc router machine tool also affects the processing effect and processing efficiency. The high-quality woodworking engraving machine has high machine configuration and good quality accessories, and the price is definitely high.

Precautions for loading and unloading of woodworking engraving machine carving knife:

1. When using the knife, use gasoline or WD40 cleaning agent to clean the chuck and pressure cap.

2. Put the collet into the pressure cap, otherwise the tool will not be easy to install. If the collet is not clamped in the pressure cap, the collet will be clamped in the motor shaft and cannot be removed when the tool is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.

4. When clamping the tool, the part of the tool extending out of the chuck should not be too long, otherwise it is easy to generate vibration during the processing, which will affect the processing quality of the work piece surface.

5. When changing the tool, it is necessary to ensure that the spindle speed is zero, that is, the tool is allowed to be disassembled when the spindle is stopped, otherwise serious personal injury accidents may occur.

6. If the presser foot is used for engraving, the dust on the presser foot and the spindle must be cleaned with a vacuum cleaner, and then the tool is clamped.

7. In the process of screwing up the pressure cap, be sure to align the pressure cap with the rotor thread, and screw it in place by hand without effort.

8. When unloading the knife, clean the waste on the pressure cap and the rotor shaft before unloading the knife.

Superstar CNC recommends products for you：CX - Double Heads Woodworking Engraving/Cutting Machine