How to use the "Reset, Pause, Stop" button of the woodworking engraving machine

There are three operation buttons in the engraving control system: pause, stop and reset. The cnc engraving woodworking machine reset, pause and stop are also a method of emergency stop. From the surface meaning, the three have similarities, and the machine will stop when the button is pressed. But the three have different meanings.

During automatic processing, the "Pause" button is valid. Press the "Pause" button, the wood engraving cnc will pause processing and lift the knife, and then enter the "Auto | Pause" state. At this point, if you want to continue to execute the processing program, just press the "Start" button or select the corresponding menu option. If the system is currently in the simulation state, select the "Pause" command, the system pauses the simulation and then enters the "Auto | Pause" state. To continue the simulation at this point, simply press the "Start" button or select the corresponding menu option.

"Stop" is valid in automatic mode or when the user enters a G-code and runs. Press this button at this time, the engraving machine will stop processing and lift the knife, and then terminate the entire processing task, and the system will enter the "Auto | Idle" state. This is a method to allow the system to normally interrupt the machining program during the machining process. At this time, if you click the "Start" button, the program will be executed from the beginning, instead of running at the previous processing point.

The "Reset" button is valid under any circumstances. Press this button, the CNC engraving machine will immediately stop the current processing task (if it is currently processing), and recover from the alarm state (if it is currently in the "alarm" state) to the "idle" state.