Is there a boot sequence for the woodworking cutting machine

Although a woodworking splitter is a fully automatic device, manual operation is still required when loading and unloading materials. Therefore, when feeding, be sure to avoid injury caused by hand contact with the blade.

The spindle speed of the woodworking cutting machine is high, and the processed wood is not very uniform, and the noise and vibration are large during the cutting process. , are likely to cause safety accidents.

So, what is the correct startup sequence for a woodworking splitter?

Step 1: Turn on the power and release the emergency stop button of the cutting machine. Only then can we be sure that the slicing machine is ready to start.

Step 2: Turn on the computer connected to the CNC feeder, enter the established operating system, find the software that controls the device, and double-click to open the CNC feeder software on the computer.

Step 3: Check whether the CNC feeding system is normal. If there is an error message about the woodworking cutting machine in the system, the equipment cannot continue to start work. It is necessary to find out the cause of the error and repair it, and then restart it after everything is normal.

Step 4: Measure whether the size of the workpiece exceeds the range of pneumatic clamping of the cutting machine, and adjust it. Once the size of the workpiece is too large, it will greatly affect the normal operation of the equipment, and more seriously, it may cause damage to the machine.

Step 5: Start the pressure device of the cutting machine, and normal processing can be carried out after the test is passed

The above is the relevant introduction of the starting sequence of the woodworking cutting machine. When using the equipment, you must abide by the relevant operating regulations to avoid safety accidents.