Talking about the solution to the non-rotation of the main shaft of the woodworking engraving machine

In the process of using the woodworking engraving machine, we will inevitably encounter some problems, such as the symptoms that the spindle does not run, which will affect the normal use of the woodworking engraving machine. So, how can we solve this problem?

1. Whether the insulation level of the motor can meet the requirements;

2. The power of the inverter is too small, and the inverter with a larger power level is selected;

3. The output side is short-circuited, whether the motor cable is damaged;

4. Acceleration overcurrent, the acceleration time is too short, prolong the acceleration time;

5. The V/F curve selection is inappropriate, adjust the V/F curve according to the actual load conditions;

6. Properly reduce the V/F compensation value;

7. If the load is too heavy, reduce the load;

8. Restart the rotating motor, and restart it after the motor has completely stopped.

Superstar CNC recommends products for you：CX-1325 Advantage engraving machine for wood furniture