How can the engraving of the woodworking engraving machine not be damaged?

To avoid these problems, we can try the following:

1. Check whether the pliers or chucks selected for engraving of the engraving machine are used incorrectly? At the same time, the wear of the pliers or chucks of the engraving machine will also cause the dislocation of the engraved objects. If the pliers or chucks are too tight, the engraved object will be ejected at the moment when the cutter head touches the engraved object.

2. For those engraved objects with irregular shapes, the engraving machine seems to have been fixed very tightly on the surface, and it will also shake back and forth when subjected to down pressure. At this time, you can try to put some scrap under the object to increase the friction. The other is to keep the packaging that comes with the item. Although the object is irregular in shape, the packaging itself may be very regular and easy to be fixed. With a small strap, the irregularly shaped object is very easy to be fixed. Easily fixed. Or try tools to fix its regular parts and discard its irregular parts.

3. If the downforce on the object to be engraved is too large, consider whether you have to use a tapered knife nose. If the pressure of the diamond cutter head of the wood carving machine is too large when it moves during the engraving process, the pressure on the side of the tool will cause the engraving. movement of things. The same problem can be caused if an incorrect diamond knife is used. A 90 or 100 degree diamond knife will carve deep into the material, causing the material to move as it is being carved.

Superstar CNC recommends products for you:CX-1325 woodworking Automatic ATC CNC Router