How to effectively solve the rust of the spindle of the stone engraving machine?

The hardness of the stone is higher, and the requirements for the engraving machine are also higher than other engraving materials. Therefore, the performance of the stone engraving machine is also very high. Stone engraving machine can be used for stone lettering, stone relief, stone Yang carving, stone Yin carving, stone line carving, stone cutting, stone hollowing, suitable for carving and manufacturing of tombstone carving, stone carving crafts and other workpieces.

Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not handled for a long time, it will shorten the life of the spindle motor and affect the use of the stone engraving machine. The following editor will introduce to you the solution to the rust of the spindle of the stone engraving machine:

1. Derusting by physical methods: Removing rust, oxide scale, etc. on the surface by hand knocking, shoveling, scraping, brushing, sanding or flexible filing, this is a radical rust removal method for painters, and a shovel, scraper, sharpener can also be used. Head hammer, wire brush, emery cloth, broken saw blade and other tools are also the easiest method.

2. Derusting by chemical method: You can use WD-40 cleaning lubricant, spray it evenly on the motor, and wipe off the rust on the stone engraving machine with a cotton cloth in about half an hour. If there is more rust, you can do it several times . WD-40 is non-conductive and has a good lubricating effect.

The above is the method of dealing with the rust of the stone engraving machine, and we must pay more attention in the ordinary application.

Superstar CNC recommends products for you : CX-3020 STONE 5 AXIS Bridge CUTTING MACHINE