Maintenance of Automatic Edge Banding Machine

After the furniture board is cut, for the sake of beauty and protection of the edge of the board, the board will be edge-banded. It is mainly divided into two categories: straight edge banding and curved edge banding.

The Automatic Edge Banding Machine is the woodworking machine that completes this step.

Wood Edge Banding Machine

However, many people ignore the maintenance of the machine while using the automatic edge banding machine, thus shortening the service life of the machine.

Maintenance mainly includes the following basic work:

1.Before booting

* Check the glue pot for foreign matter, and clean it up in time

* Choose appropriate lubricating oil to lubricate the bearings of each part of the edge banding machine

* Check the wear of wearing parts and replace them in time

* The amount of glue applied by the edge banding machine and the temperature of use should also be adjusted according to the thickness, width and size of the board, as well as the heating capacity of the edge banding machine itself

Full Automatic Edge Banding Machine

2. After use

* Timely remove the sawdust and various sundries generated during the production process to prevent the machine from being stuck due to the accumulation of waste materials

* Use an air gun to blow off the dust and debris on the equipment, and pay attention to whether there is any abnormal noise when the gear box is working

* Keep the surface of the machine clean and prevent harmful substances from corroding the surface of the machine

3. Workers

Workers will be employed after training, have relevant work experience, and have a strong sense of safety