The faults and solutions of the engraving machine, you should know these

The engraving machine is a kind of drilling and milling combined processing equipment, which is used in all walks of life now. In the process of using the engraving machine, some machine failures will inevitably occur. It is very necessary to understand the analysis and solutions of some common failures. Introduce to you the solutions of six common types of common faults.

1. The phenomenon of segment knife occurs.

Solution:

(1) The power of the Z-axis motor is not enough, and the coupling is loose;

(2) The current of the Z-axis driver is too small, or the signal line is connected incorrectly.

2. When the software is turned on, the spindle is turned off.

Solution:

(1) The problem of the driver or the poor contact of the computer output signal line;

(2) The motor wire is in poor contact.

3. There is a limit phenomenon during the engraving process.

Solution:

(1) Check whether the engraving path exceeds the engraving range;

(2) The software limit set by the parameters in the V6.02 software.

4. The machine is not powered on when it is turned on.

Solution:

(1) Check whether the start button line is connected well and whether the button is burnt out;

(2) Check whether the AC contactor is short-circuited or burned out.

5. When the button moves, the axis only goes in one direction.

Solution:

(1) Check whether the light is working normally and whether the circuit is in good contact;

(2) Check whether the motor circuit has virtual welding.

6. The sending software cannot be opened normally, and the engraved thing is deformed.

Solution:

(1) Reinstall the new system and software;

(2) Check whether the X, Y axis screw and screws are loose;

(3) There is a problem with the engraving knife

Please do not panic when the fault occurs, and first perform troubleshooting and testing according to the above steps.

Have you learned any of the above methods? I hope it will be helpful to you. If you like, please pay more attention to the official website of Superstar CNC, and will share more knowledge about the engraving machine with you later.