What should I do if the spindle motor of the woodworking engraving machine is rusted?

The rusting of the main shaft of the MDF wood cutting machine is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust. Slight rust will not affect the normal use of the spindle motor, but if it is not handled for a long time, the life of the spindle motor will be shortened.

The following Superstar CNC provides you with some rust removal methods for the spindle motor of woodworking engraving machine:

1. Eliminate rust, oxide scale, etc. on the surface by hand knocking, shoveling, scraping, brushing, sanding or flexible filing. This is a radical rust removal method for painters. You can also use a shovel, scraper, pointed hammer, wire brush , abrasive cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine, maintenance personnel need to be very careful when removing rust, and a little carelessness can easily cause the machine spindle to deviate from the track.

2. Use a cleaning lubricant and spray it evenly on the motor. You can wipe off the rust on the stone engraving machine with a cotton cloth in about half an hour. If the rust is severe, you can spray the lubricant several times. Lubricant cleaners are non-conductive and have a good lubricating effect.

The above is the method to deal with the rust of the spindle motor of the engraving machine, I hope it can help you. If you have any questions, you can contact us at cncrouter.cn, the official website of Superstar CNC.

Superstar CNC recommends products for you：CX-1325 woodworking cnc wood router machinery