Author: Superstar Publish Time: 2022-09-06 Origin: Site
In normal use, the engraving machine should be cleaned frequently and lubricated with oil. Otherwise, under the long-term operation of the relief engraving machine, a considerable amount of dust and impurities will enter the lead screw, guide rail and bearing, resulting in a large rotation resistance of the lead screw bearing. If the engraving speed is slightly faster, there will be a phenomenon of lost steps and dislocations.
Many people think that there is a lot of dust in the working process of the wood engraving machine, which means that it is used in the dust itself. If it is cleaned every day, it will be very troublesome, so many people not only do not clean it, but also It's not right to leave the machine full of stuff.
The correct way to use the wood engraving machine is:
1. After the work is completed, the countertop should be cleaned in time, which provides convenience for the next work.
2. Clean up the guide rail and the material chips next to the guide rail to prevent the machine from jamming during the working process due to the interference of the chips.
3. Regularly clean the lead screw to prevent foreign objects from sticking to the lead screw. The lead screw is very important in the equipment. It determines the accuracy of the machine, and the lead screw also plays an important role in the transmission process.
4. Regularly clean the control box, dust is the biggest obstacle to the circuit board.
