How to lubricate and maintain the woodworking cutting machine?

When the furniture factory uses the woodworking cutting machine on a daily basis, it must clean up the dust and powder generated during the processing in time, and add lubricating oil regularly. If these maintenance steps are lacking, it is easy to cause excessive rotation resistance of the screw and bearing after the machine runs for a long time, resulting in poor processing effect or easy damage to the equipment, and ultimately causing unnecessary economic losses. So what should we pay attention to when lubricating and maintaining the woodworking cutting machine?

1. Before adding lubricating oil, clean the guide rail and lead screw of the cutting machine, and use a cloth to remove the residual oil and material debris on the guide rail and lead screw.

2. The more suitable lubricating oil maintenance cycle is twice a month, that is, adding lubricating oil maintenance every two weeks.

3. If the feeder is idle for a long time, it should be refueled and idled regularly to ensure the flexibility of the transmission system.

4. After the CNC woodworking cutting machine is refueled, it should be adjusted to run back and forth at a low speed to ensure that the lubricating oil after refueling can be evenly added to the guide rails and lead screws of the machine.

There are two commonly used lubrication methods for woodworking cutting machines: automatic lubrication and manual lubrication. Lubricating is only part of lubrication. Lubrication of equipment actually begins at its design stage and continues throughout the life of the equipment.

Under normal circumstances, the lubricating oil of the woodworking cutting machine should not be replaced at will. If it is replaced without authorization, it will destroy the lubricating environment of the equipment, wear out the mechanical equipment, and cause economic losses.