How to optimize and set the processing path of woodworking engraving machine

In the process of using the woodworking engraving machine, we often need to optimize the engraving path, so that a better engraving effect can be achieved gradually. The following is a simple sharing of the engraving setting problem.

In the engraving software, the user can edit and modify the generated two-dimensional path. When editing, first select the path graphics we need to edit, and then click "Engraving Path Editing" under "Path Calculation", a tool bar for engraving path editing will appear, select the path that needs to be edited, and edit and modify it.

The selected paths can be sorted in sequence; the last item is to save, but we must not forget to save after modification. For the insurance period, after the program is loaded into the cnc 4 axis router for wood work, it must be simulated and previewed to avoid errors.

How to set the engraving starting position of the engraving machine, the starting position is mostly set in the lower left corner or the center, manually move the knife to the required starting point to set the program path of the CNC engraving machine.

First set the starting point, any point in the engraving path of the CNC engraving machine can be defined as the starting point of the engraving path to change the position of the drop point during processing. The second is to set the path reverse, and change the selected engraving path of the 6090 cnc router 3 axis to the reverse direction, so that the processing direction is consistent with the texture of the processing material. Design the arc fit again, and you will get better results with arc curves compared to short polylines. It will make the machined curve smoother.

Superstar CNC recommends machines for you：CX-B1 Multi-spindle Woodworking Cutting Machine for Funiture Cabinets