How to prevent the water-cooled spindle of woodworking engraving machine from clogging

First, make sure the water is clean. You can put a layer of filter screen on the water outlet of the pump, and replace the circulating water of the pump in time every day. During normal processing, the temperature of the spindle should be regularly touched. When the temperature is high, the water flow of the water pipe should be checked to prevent the spindle temperature from being too high and damaging the spindle.

The air-cooled spindle will not have this kind of blockage, but the noise is large, and the water-cooled spindle and the air-cooled spindle have their own advantages and disadvantages. The service life of the air-cooled spindle is relatively long. Low speed. The water-cooled spindle has high speed and low noise, but if the engraving machine is to process for a long time, it is necessary to ensure that circulating water is supplied to the spindle.

3KW Water Cooling Spindle Motor

Generally, customers who do relief processing know that some sawdust and dust will easily fall into the circulating water during processing. After a long time, there will be too many impurities in the water, which will flow into the water pipe or the main shaft, which will cause the circulating water flow to become smaller or blocked. Once this happens, take timely measures to remove the dust and debris inside the water pipe.