How to use the handle of the woodworking engraving machine to control the system U disk

With the continuous development and progress of technology, the functions of woodworking engraving machines are also increasing. Now many woodworking engraving machines are equipped with a USB interface on the left side of the control system, so that customers can use U disk or hard disk to transfer data and complete the engraving task.

So, what problems should we pay attention to when we use the U disk for engraving?

1. It is recommended to format the U disk before using it for the first time.

At present, most woodworking engraving machines are compatible with all U disks in FAT16 or FAT32 format, but because the operation delay parameters of some U disks are too different from those of ordinary U disks (this is very rare), it will If the reading and writing is abnormal, please replace it with another type of U disk.

2. It is recommended to use U disk only.

Due to some particularities of the woodworking engraving machine system, the U disk is required to be fixed and dedicated. Too many files cannot be stored in the U disk, and it is best not to store other types of files. It is best not to have a folder in the U disk, otherwise it may not be able to read and write normally.