Is the reset of the panel furniture cutting machine abnormal

The reset function of the panel furniture cutting machine is that after pressing the reset button, the panel furniture cutting machine will immediately stop the current engraving task during the engraving process, return to the idle state, and the engraving head will return to the origin. Sometimes we may encounter that the reset button of the panel furniture cutting machine cannot be used normally.

The following Superstar CNC will analyze the reasons for the abnormal reset of the lower panel furniture cutting machine:

1. Check whether the engraving machine sensor is stained with dust, has poor contact or is damaged. Wipe the dust off the sensor, if it still doesn't work, just replace the sensor.

2. Check whether the sensor link data line of the wood cnc router machine is in poor contact or damaged. Re-plug and unplug the data cable to check whether it can be used. If it still doesn't work, replace the data cable head. If it doesn't work, you can only change the data cable.

3. Check that the ground wire of the panel furniture cutting machine is damaged or has poor contact. Check whether the grounding wire is in good condition and whether the grounding wire is not connected to the metal and install the grounding wire in another place.

4. The motor wire of the panel furniture cutting machine is in poor contact. This problem is relatively simple, use a multi meter to test whether the two ends are powered.