What are the requirements for the power supply of the wood cutting machine?

The panel furniture production line is the best equipment for furniture production and processing. The cutting machine has fast processing speed and high processing efficiency. In order to improve productivity, the manufacturer requires a relatively high workload for the power supply, so what are the requirements for the power supply of the furniture cutting machine?

CNC Wood Cutting Machine with Sevo Motor

CNC router requirements for power supply:

The power supply is the root of the operation of the woodworking furniture cutting machine. Failure or failure of the power supply is likely to cause great damage and impact on the machine, and even system damage. In addition, the processing program is stored in the memory, which will cause data loss after a long time .

The fluctuation of the grid voltage should be controlled between 10%-15%, but some workshops have relatively large voltage fluctuations and high-frequency pulse interference, coupled with interference from other factors, the operation of the panel furniture production line will also be affected.

It is recommended to connect mechanical and electrical equipment to a single power source. If it is necessary to use other power sources to supply power to some parts of electrical equipment (such as electronic circuits, electromagnetic clutches), these power sources should be composed of equipment (such as transformers, transducers, etc.) that are part of mechanical and electrical equipment as much as possible.

 Wood Cutting Machine

Unless the mechanical and electrical equipment is directly connected to the power supply with a plug/socket, it is recommended that the power cord be directly connected to the power terminal of the power cutoff switch. If this is not possible, a separate terminal block should be provided for the power cord. The handle of the power switch should be easily accessible, and should be installed between 0.6M and 1.9M above the easy-to-operate position, and the upper limit is recommended to be 1.7M. In this way, power can be cut off quickly in an emergency, reducing losses and casualties.

The above are the power requirements of the woodworking furniture cutting machine. The above content has been introduced for you, and I hope it can help you.