Will external factors have an impact on the woodworking splitter?

Woodworking cutting machine belongs to high-tech mechanical processing equipment, which is a processing machine controlled by computer numerical control. Therefore, in the processing process, it will be interfered by various external factors, such as changes in ambient temperature, humidity, and vibration of surrounding magnetic fields.

The influence of external factors on the woodworking cutting machine:

1. Due to the interference of external magnetic fields, the control system of the cutting machine is composed of various electronic components, each functional component has a certain voltage and frequency range, so it is easily interfered by various external magnetic fields, and the instability of any component will Lead to the overall processing error of the cutting machine.

2. Temperature difference and high air humidity will affect the performance of the control system and drive motor of the cutting machine. When the temperature exceeds a certain range, the control system may make an error, and the driving torque of the drive motor cannot reach the rated value, thereby affecting the normal processing of the woodworking cutting machine. When the temperature is too low, the water in the water cycle will freeze, which will easily lead to problems such as the spindle burnout.

3. The workshop where the cutting machine is located must be kept clean. Cleaning and testing should be carried out before and after the equipment is used to avoid dust falling on the electronic components, affecting the heat dissipation of the equipment and the sensitivity of the contactor.

To sum up, the woodworking cutting machine will definitely be affected by the external environment, and the influencing factors are not limited to the external magnetic field, temperature and humidity, and the workshop environment. At the same time, it should be noted that the mechanical equipment must be cleaned after use, and necessary tests should be carried out before use to ensure the normal operation of the machine and eliminate potential safety hazards.