Views:230 Author:Superstar Publish Time: 2021-11-25 Origin:Site
In the production of some woodworking enterprises, woodworking engraving opportunities produce a large amount of sawdust powder, so the use of vacuum cleaner equipment woodworking engraving machine has great benefits, can avoid the pollution of woodworking engraving machine, etc., it is also conducive to the usual maintenance and maintenance work, but also It can avoid causing physical injury to the operator.
First of all, when choosing an engraving machine, we must choose an engraving machine with a dust-proof and dust-removing device. Because it can suck away a large amount of dust generated during engraving at any time during the engraving process. Even so, there will still be a certain amount of dust in the air, so we recommend that operators wear protective glasses and dust masks during work to protect eyes and respiratory organs and prevent dust damage.
Secondly, the vacuum cleaner plays an important protective role in the working process of the woodworking engraving machine. Therefore, we recommend that customers should equip the machine with a vacuum cleaner. On the one hand, it can maintain the sanitation of the surrounding environment, and on the other hand, it can better protect the woodworking engraving machine.The operators themselves must also take corresponding protective measures. The addition of a dust collector can not only extend the life of the engraving machine, but also save time for maintaining the engraving machine.
The daily maintenance of the dustproof device of the woodworking engraving machine is as follows:
First, check every day to remove all kinds of chips and other dirt on the surface, prevent the accumulation of debris, check whether the running track meets the requirements of lubrication, and prevent damage caused by huge friction caused by insufficient lubricating oil. Look at the guide rail. Whether the surface is smooth and whether there are scratches, it is best to repeat these problems before leaving work every day. These tasks are the focus of every day and hope to attract everyone's attention.
Secondly, the content of the regular inspection is mainly the inspection of the dust cover of the engraving machine to prevent dust and abrasive particles from adhering to the surface of the cooling pipe. If these things exist, it will affect the service life of the screw and the accuracy of the work, and cause the product to be unqualified. ; If damage to the screw guard is found during the inspection, it should be repaired in time, and replaced in time when the damage is more serious. Drain the water in the water tank after each work, and then wipe the whole machine with a dry cloth.
The above are some suggestions and maintenance methods from Superstar CNC. Ask us if you have any questions, and we will give you the most comprehensive answer.