How to choose CNC cutting machine system

Many customers will ask a question when purchasing a CNC cutting machine, what is the control system used for? Which control system is better?

The SYNTEC system, LNC system and Weihong system are mostly used in woodworking cutting machine systems. Among them, the SYNTEC and LNC systems are developed and produced in the same area, and the Weihong system is Shanghai. Each system has different functions because of different prices.

(1)LNC system is an early numerical control system, but due to some reasons, the development is not good, and the market share is not very high, so it is not known by many people, but it still performs well in terms of stability and functionality.

(2)The SYNTEC system is a relatively stable one, and its functions are very complete, supporting functions such as signal feedback and alarm reminders. When the cutting machine is powered on using the SYNTEC system, the system can automatically detect whether there is any connection between the transmission components. If the parts are damaged, it can automatically feedback the processing progress of the machine during processing. If the actual processing stroke does not reach the command value given by the system parameters, the system will continuously send signals to the transmission device, so that the actual processing parameters of the transmission device are infinitely close to System parameter value.

(3)The domestically produced Shanghai Weihong system is relatively cheap, and its functionality is also satisfactory for woodworking cutting machines. The Weihong NK260 system used in the cutting machine is still very good. If the budget is not high, you can consider the system of this brand.

In terms of function, the SYNTEC and LNC systems are basically semi-closed loop control systems with good signal coding feedback function, so they will self-check when they are turned on. Most of Weihong systems are open-loop control systems without signal coding feedback. There is basically no deep self-inspection when starting up, but for panel furniture cutting, the parameters are already set, and basically there will not be too many problems.

Therefore, when choosing a cutting machine system, these four models are basically good, and customers can choose according to their own purchase budget.