What is the main function of the wooden CNC router reducer?
Author: Superstar Publish Time: 2023-02-08 Origin: Site
The wood cutting machine has the characteristics of large processing capacity and high precision. When in use, the load capacity of the equipment usually exceeds the torque capacity of the servo motor itself. In order to improve the processing capacity of the cutting machine, it is necessary to use a reducer to increase the output torque of the servo motor to solve this problem. The following is an introduction to the function of installing the reducer.
The main function of the reducer installed in the CNC router:
1. Increase torque:
The method to increase the output torque can be to directly increase the output torque of the servo motor, without using expensive high-power servo motors, and the structure is more robust, and the increase in torque is proportional to the increase in control current. In this case, choosing a larger drive and raising the standard of power electronic components and related electromechanical equipment will greatly increase the cost of the control system.
2. Positive performance:
Improper matching of the load inertia of the wooden CNC router is one of the reasons for the instability of the servo control. For large load inertia, the equivalent load inertia can be distributed by the inverse of the square of the reduction ratio, so as to be controlled. Therefore, from this point of view, the reducer matches the control echo of the servo application.
The reducer can also cope with the attenuation of the motor's low-speed control characteristics. Due to the controllability of the servo motor, there will be a certain degree of attenuation due to the reduction of speed, especially for the stability of signal acquisition and current control at low speed.
The main purpose of installing the reducer on the wooden CNC router is to increase the torque, increase the strength of use, control the forward performance and prolong the service life of the equipment. In short, the installation of the reducer has a great auxiliary effect on the equipment.
