You are here:Home » News » Guide » Wood Sanding Machine Operation Guide
Wood Sanding Machine Operation Guide
Author: Superstar Publish Time: 2022-12-27 Origin: Site
The wood sanding machinecan be used for sanding cabinet doors, sliding doors and other furniture. This article takes you to understand how the wood sanding machineworks.
Sanding machine operation steps:
1. Operators must be trained before taking up the job, know how to operate safely, and be able to complete the normal maintenance of the machine tool. Before starting the wood sanding machine, check and clean up the sundries around the machine tool, especially the conveying platform, and any sundries are strictly prohibited.
2. Open the windows and doors on both sides of the machine tool to check whether there are any scratches and residual seams on the sanding belt. The surface of each work roller should be smooth without pollutants and indentations.
3. Turn on the main power of the woodworking wood sanding machine, press the up button of the conveyor table, and adjust the conveyor table to the required height according to the thickness of the workpiece and the amount of sanding required.
4. Tension the abrasive belt of the wood sanding machine, press the corresponding button, start various sanding heads, and observe whether the abrasive belt moves normally.
5. Press the feeding start button to start the conveyor belt, and select the appropriate feeding speed according to the sanding object (note: the adjustment of the conveyor speed change device must be carried out after starting).
6. Close all windows and doors, start the vacuum device, and sand the required workpieces.
7. When replacing the abrasive belt of the wood sanding machine, be sure to lock the handle of the roller bracket, start the machine empty and observe whether the movement is normal and the swing is stable, and adjust accordingly if necessary.
8. After the woodworking sanding machine finishes processing, press each stop button respectively, and after the abrasive belt stops slowly, release the abrasive belt.
9. The emergency brake button can only be used in emergency situations. You must use the stop button when stopping the machine at ordinary times.
10. After the woodworking sanding machine is finished, clean the entire machine tool, and there must be no dirt on the surface of the feeding belt and sanding roller.
