The woodworking engraving machine will always have one kind or another failure during the long-term use. Superstar CNC will explain the performance and solution when the drive fails:Woodworking furniture cutting machines drive failure1. During the engraving process, everything moves normally, but af

cnc machine wood water-cooled motor operation failure1) After clicking the "Spindle On:" item in the control system, the spindle motor does not rotate①Check the data cable interface, if the interface is loose, please reconnect②Check whether the inverter power supply is normal③ Check whether there is

The stepping motor of the woodworking engraving machine has a pause every time it takes a step, and it is normal to have noise. At a certain frequency, the woodworking engraving machine will also produce body resonance and emit obvious noise. This kind of noise will not affect the normal use of the

The effect engraved by the engraving machine does not necessarily meet the customer's requirements 100%, especially if the engraved effect is not smooth enough, it is necessary to find out the reason and deal with it in time. If this happens, there are mainly two reasons:1. There is a gap between th

During the long-term use of the woodworking engraving machine, the limit trigger will occur, so what is the cause? Faced with such a problem, how should we solve it? ?Generally speaking, when this phenomenon occurs, the woodworking engraving machine may be beyond the scope of engraving, so we must s

Factors affecting the grinding surface quality of woodworking engraving machine: with the increase of grinding speed, the height of the unevenness of the grinding surface decreases, the greater the feed speed of the work piece, the height of the unevenness of the machined surface decreases, the surf